View FTP-628DSL306_4173176.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BATTERY DRIVEN, FTP-608 Series 2" HIGH SPEED THERMAL PRINTER
FTP-628MCL353/354 #01 / #02
s OVERVIEW
The FTP-628 MCL Series are battery driven high-speed printers with a 2-inch paper width equivalent. The FTP-628 MCL Series can be used for a variety of applications, such as portable terminals, POS, ticket issuing machines, label printers, banking terminals, and measurement and medical equipment.
s HIGHLIGHTS
* Ultra compact Height 26.4 mm, width 83.5 mm, depth 43.0 mm * High speed printing It can print at 60 mm/s (480 dotlines/s) maximum by using Fujitsu's unique head drive control. * Auto Cutter Full cut type (#01) and partial cut type (#02) printers are available. * Easy paper setting Our unique platen release mechanism allows a wide paper route even if the printer is ultra-compact, so paper can be easily inserted. Conventional auto loading is also available. FTP-628MCL354
FTP-628DSL306
1
FTP-628MCL353/354
s PART NUMBERS
Part Number FTP-628MCL353#01 (front paper insertion, full cut type with knob) FTP-628MCL353#02 (front paper insertion, partial cut type with knob) FTP-628MCL354#01 (bottom paper insertion, full cut type without knob) FTP-628MCL354#02 (bottom paper insertion, partial cut type without knob) FTP-628CU301 (ANK only) FTP-628DCL301 Parallel (Centronics) FTP-628DSL306 Serial (RS232C) FTP-628Y202
Printer mechanism with Cutter
LSI for driving Interface Board Cutter for Mech/Cutter supported Interface cables Parallel (Centronics)
Serial (RS232C) FTP-628Y302 Power cable Head, motor, logic FTP-628Y402
s SPECIFICATIONS
Item Part number Printing method Dot structure Dot pitch (Horizontal) Dot pitch (Vertical) Effective printing area Number of columns Paper width Paper thickness Printing Speed Character types Specifications FTP-628MCL353#01/#02, FTP-628MCL354#01/#02 Thermal-line dot method 384 dots/line 0.125 mm (8 dots/mm)--Dot density 0.125 mm (8 dots/mm)--Line feed pitch 48 mm ANK 32 columns/line (maximum 12 x 24 dot font) 58 mm 60 to 80 m (some paper in this range may not be used because of paper characteristics) Maximum 60mm/sec. (480 dot line/sec.) at 8.5V Alphanumeric, kana: International characters: JIS Kanji (Kanji CG loaded board): 12 x 24 dots, (1.5 x 3.0 mm), 32 columns: ANK 24 x 24 dots, (3.0 x 3.0 mm), 16 columns: ANK 8 x 16 dots, (1.0 x 2.0 mm), 48 columns: ANK 16 x 16 dots, (2.0 x 2.0 mm), 24 columns: ANK 159 types 195 types about 6800 types
Character, dimensions (WxH), number of columns
2
FTP-628MCL353/354
s SPECIFICATIONS
Item Interface For print head Power supply For motor For cutter For logic Mechanism with cutter Dimensions Interface board Mechanism with cutter Weight Interface board Head Life Cutter Operating temperature* Operating humidity Operating environment Storage temperature Storage humidity Head temperature detection Paper out/mark detection Platen release Approximately 20g Pulse resistance: 100 million pulses/dot (under our standard conditions); Abrasion resistance: paper traveling distance 50km (print ratio: 25% or less) 300,000 cuts 0 C to 50 C 20 to 85% RH (no condensation) -20 C to +60 C (paper not included) 5 to 95% RH (no condensation) Detected by thermistor Detected by photo-interrupter Detected by sliding switch High Sensitive Paper Standard paper: TF50KS-E4 (Nippon Paper) TF60KS-E(Nippon Paper), FTP020PU001 (58mm), PD105R (Oji Paper), FTP-020P0701 (58mm) TF60KS-F1, FTP-020P0102 (58mm), PD170R (Oji Paper), P220VBB-1 Mitsubishi Paper) PD160R-N (Oji Paper), AFB-235 (Mitsubishi Paper), TP50KJ-R (Nippon Paper), HA220AA (Nippon Paper) 69.3 x 52 x 15mm Approximately 120g Specification Conforms to RS232C / Centronics 4.2 - 8.5 VDC average current, 0.78A (0.93A) peak value (print ratio: 12.5%, print speed: 50mm/sec. at 7.2V) 4.2 - 8.5 VDC, 1A maximum 5 VDC 5%, 1A maximum 5 VDC 5%, 0.1 A maximum 83.5 x 43.0 x 26.4 mm (WxDxH)
Detection function
Recommended thermal sensitive paper
Medium Life Paper
Long Life Paper
*+5C to +40C printing density assurance rance (-25 to 70C capability)
3
FTP-628MCL353/354
s FUNCTION OF INTERFACE BOARD
Item 1. 2. 3. 4. 5. 6. 7. Test print function Paper out detection Paper near end detection Platen open detection Thermal head temperature abnormality detection Blow-out fuse detection Head voltage abnormality detection 8. 9. 10. 11. 12. 13. 14. Item Cutter trouble detect Motor power saving function Mark detection function MCU operation abnormality detection Power ON/OFF sequence protection Motor over-current protection Hardware timer
s DIMENSIONS
1. Printer mechanism
FTP-628MCL353
FTP-628MCL354
83.5 1 26.4 12 38.6 58
at release at close
80.5 1 26.4 38.6 58
at release at close
(26. 32 29.5
(26 3
(75)
(67)
3 MAX
33.7 .9
45
3 MAX 33.7
(75)
(67)
45
(37.2) (37.2)
Unit: mm
Note: 1. Dimensions are nominal value (tolerance 5 unless otherwise specified). 2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is open.
4
FTP-628MCL353/354
2. Interface board
Unit: mm
5
FTP-628MCL353/354
1. Connector (FPC) specification (CN4)
(1) Connector Mechanical unit side: FPC connector Remote side (housing site): 52610-3090 (made by Molex) (2) Pin assignment on the mechanical side
No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 PHK VSEN PHE SW1 SW2 VH VH DI CLK GND GND STB6 STB5 STB4 VDD TM TM STB3 STB2 STB1 GND GND LAT DO VH VH MT/A MT/A MT/B MT/B Signal I/O -- I O O I I Head drive power I I I -- Ground power supply for thermal head -- I I I I O O I I I -- Ground power supply for thermal head -- I O I Power supply for thermal head I I I Stepping motor excitation signal I I
6
Contents Cathode for photo interruptor paper sensor power Emittor for photo interruptor Platen release switch Platen release switch
Data in Synchronous clock for communication
Thermal head energizing control signal
Logic power Thermally sensitive resistor input termnial 1 Thermally sensitive resistor input termnial 2
Thermal head energizing control signal
Data latch Data out
FTP-628MCL353/354
Sensor (Photointerruptor) Platen unit Thermal head Motor
FPC Connect terminal: surface side Connector No 30,29, .....................2,1 (FPC pin numbers)
2. Cutter (CN5)
Connector on control circuit side: B4B-PH-K-S (J.S.T. or equivalent)
No. 1 3 Signal CHP MT+ I/O I O Contents Cutter position detect signal Stepping motor coil excitation A No. 2 4 Signal GND MTI/O O Contents Logic ground Not connected
Fujitsu Components International Headquarter Offices
Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com
Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com
(c) 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 11/15/2004.
7

▲Up To Search▲

Price & Availability of FTP-628DSL306

	To Download FTP-628DSL306 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .